Sangoma A20003 Analogue Telephony Card 6 FXO

Sangoma A20003 Analogue Telephony Card 6 FXO
The A200 consists of a REMORA daughterboard mounted on the AFT PCI card. The REMORA card has two sockets each of which can accept an FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS ports respectively. Up to four additional REMORA daughterboards can be mounted in empty slot positions beside the A201 assembly, connected to the A201 by a backplane bus connector. Technical Specifications: From 2 to 24 ports supported, mixing FXO and FXS interfaces as required. Support for the Asterisk, OPAL PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications. Single synchronous PCI interface for all 24 FXO/FXS ports. Four RJ11 4 ports per REMORA card. Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis. Short 2U compatible mounting clips included for installation in 2U rackmount servers. 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention. Autosense compatibility with 5v and 3.3v PCI busses. Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper interrupt sharing. Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new featuresrelated to voice and/or data can be added when they become available.